PROTECT YOUR EQUIPMENT
The heart of the diesel engine is its fuel injection system and a major enemy of the system is poor quality diesel fuel. No other fuel additive provides all the benefits of Standyne's Performance Formula:
· Upgrades and stabilizes fuel by reducing sludge and fuel tank contaminants.
· Removes varnish and other deposits to prevent plugging.
· Increases power & economy with cetane enhancer.
· Protects against bio and ultra low sulfur diesel (ULSD) fuels to reduce wear.
· Protects against corrosion with an alcohol free formula.
· Helps remove water from fuel.
· Provides hot and cold weather protection.
Stanadyne's Performance Formula fuel additive eliminates the need for expensive "premium" or blended fuel and is your insurance against poor quality diesel fuel. Protection Test Test Engineers ran two identically prepared fuel pumps for more than 2,000 hours (approximately 125,000 road miles). Both ran on DF-2 diesel fuel, one had Stanadyne Performance Formula added to the fuel at the recommended treatment ratio. At the end of the test, the pumps were completely disassembled and inspected. The results show significant differences — parts without additive were dirty and worn; parts with additive were clean and protected! Performance with Savings As well as protecting your engine, Performance Formula®, as its name implies, also improves engine performance. It achieves this by ensuring clean pumps and injectors, reducing wear on components and restoring lubricity. In addition, the cetane improver in Performance Formula results in easier starting, less smoke and more complete combustion. The net result is more horsepower, torque and miles per gallon. Consequently, a significant cost savings to you. Regular use of Stanadyne's Performance Formula will more than pay for itself — by savings at the filling station, from repairs and by extending maintenance intervals. Performance Test Independent test engineers ran transient and steady state tests over time on school buses, using a Mustang dynamometer to obtain torque and horsepower ratings before and after the use of Performance Formula. According to the test engineers, the improvements after adding Stanadyne Performance Formula were dramatic and impressive, as shown on the torque and horsepower graphs. Proven by Independent Testing Southwest Research Institute — one of the world's leading R&D facilities in the field of engine, component and vehicle testing — evaluated ten of North America's most popular diesel fuel additives in three key areas: • Cetane number (affects ease of starting, noise, power output and emissions) • Lubricity (critical with today's low sulfur fuels) • Cold weather protection (against waxing or gelling diesel fuel) The results shown in the charts are clear — Stanadyne Performance Formula is the best in all three tests. Approved by Engine and Vehicle Manufacturers Stanadyne diesel fuel additives have been tested and approved by engine and vehicle manufacturers since 1993. Ford, General Motors, Volkswagen, Navistar, John Deere, Caterpillar, AM General and others have recommended using Stanadyne diesel fuel additives in their engines or vehicles. Today's new technology fuel systems such as: High Pressure Common Rail, HUEI and MUEI fuel systems, unit injectors, as well as conventional rotary distributor and inline injection pumps have all been tested and approved using Performance Formula. Engine warranties should not be affected and indeed several fuel injection repair facilities offer extended warranty if Stanadyne additives are used regularly to protect the sensitive fuel system components.